Tag Archive for: LED screens

How do I Choose an LED Screen?

LED screens are widely in use these days, be it for domestic or commercial purposes. These have now become the standard technology for display purposes. Electronic devices like mobile phones, TVs, tablets, computer monitors, laptop screens, etc., use a LED display to display their output. And if you are looking for a smart advertising solution for your business, digital billboards can make your brand stand out from the rest. With a sharp, vivid display, you can capture the attention of passersby promptly. The most significant benefit is that it is very cost-effective and has low energy consumption.

Moreover, LEDs have several advantages over other light-emitting sources that can be used alternatively. Besides being power efficient, LEDs have tremendous light intensity and produce better light. These are low maintenance and are highly resistant to damage.

These are the following things to keep in mind while choosing an LED screen:


The brightness of the LED screen is one of the essential features that you need to be cautious about. A screen that is too bright will cause discomfort, while a too dim screen will hamper visibility. Therefore, go for the one with suitable nits. The common brightness conditions are 800 to 1,500 nits for indoor displays and 5000+ for outdoor displays.

Pixel Pitch

Pixel pitch is a very prominent feature as it affects the optimum viewing distance and the visual performance of an LED screen. It tells us about the pixel density and resolution. A smaller pixel pitch indicates higher pixel density and higher resolution.

IP Rating

An IP rating of LED light is the measurement of protection that LED light will have against liquid (water) and solid (dirt, dust, etc.) objects. Indoor and outdoor LED lights come with different Ingress Protection (IP) ratings. There are two numbers in the IP rating; the first number (0 to 6), in a solid IP rating. It shows the resistance against solid objects. The second number (0 to 8) indicates the safety against water. The most used waterproof LED lights are IP65 LED lights.

Refresh Rate

Refresh Rate is the value that tells how many times per second screen displays data. The minimum refresh rate is 400 Hz, and it may go as high as 9000 Hz, but it may result in reduced brightness. To display beautifully and vibrantly, the refresh rate needs to be at least 1000Hz.


DIP has 3 separate diodes, whereas SMD has seamless diodes formed by 3 colores mounted on a die. Both the concepts do the same job, but DIP is faster and easier to manufacture; therefore, it is cost-effective. SMD, on the other hand, gives high resolution due to its compact form. DIP is the most durable and stable solution for outdoor led display. And SMD is more popular now due to its better picture quality, higher resolution, and wider viewing angle, best suited for indoors.

If you want to buy an LED display, go for PixelPLUS, a renowned brand in Dubai, offering a broad scope of LED Display Screens to upgrade your resolution. PixelPLUS has arisen as a leading LED Display creator and is known for its quality item and administrations. Their LED screens are of premium quality and bring an excellent level of picture quality

How do you make a large LED screen?

You don’t need to be an engineer to make such a LED video screen. Also, making an LED screen makes you feel good and helps you in many ways. It can help you enjoy movies of your choice, studying on a big screen and many more.


  • To make a LED screen, the first important step is the selection of LED panels:

Use a LED modules with a resolution of supposing 64×64 pixels. Each pixel has a size of 3x3mm, and so the total module size becomes 192x192mm. However, you can buy the number of panels according to your choice. Suppose you buy 12 such panels.

  • Arrange the cables and connectors needed:

In the bundle of the panels, you get some of the power cables and interface cables that you will need while making the screen. Look for 4 x 5V DC power cables with two outputs. 8x Flat Data cable with two outputs in it.

  • Look for the RGB LED panel controller:

You can control the LED screens consisting of five panels horizontally and vertically. A total of 25 panels suppose. However, these RGB LED panel supports control and downloading of the program over the local network. Also, the video playback and when installing the Wi-Fi module and wireless connection to the computer.

  • Laptop:

Make sure you have a laptop with a DVI interface. Also, Install the latest LED Studio Control Software.

  • Hub:

Hub is needed to connect the panels.

  • Controller:

The controller is used to control the overflow of pixels.

  • Power supply :

You will need a power supply of 200 watts and a voltage of 5 volts. However, the current consumption in this can be 40 or more amperes.

  • Case:

If you want to make different screens, large and small, then these cases will be helpful.

STEP – 2 :

Connect all the parts (LED Display module, LED receiving card, LED power supply ) with the help of a screwdriver and power in ON mode.

STEP – 3 :

Connect the laptop and config the LED screen by the LED studio. Also, set up the correct configuration of the Graphic card and sending box.

  • Send the correct RCG files to the LED module.
  • Make the correct resolution for LED Receiver.
  • Also, do the white balance test on the led to check the dead LED.

STEP -4:

Make the playlist by LED studio and play whatever you want to play with the screen.

Try to make your own LED screen with some new creativity available online. Also, you can purchase the finished led video display from led display factories as well. But, if you do not want to buy it and sell it instead. It will be the best way to create an LED screen at minimum spending. Also, by Novastar LED control system, you can build a LED screen of your own.